Quantcast
Channel: Linux | Kernel

[PATCH v7 1/2] dt-bindings: display: panel: Add bindings for Novatek nt36672a

Novatek nt36672a is a display driver IC that can drive DSI panel. It is also present in the Tianma video mode panel, which is a FHD+ panel with a reso

View Article



KASAN: use-after-free Write in xp_put_pool

Hello, syzbot found the following issue on: HEAD commit: dc1a9bf2 octeontx2-pf: Add UDP segmentation offload support git tree: net-next con

View Article

general protection fault in snd_ctl_release

Hello, syzbot found the following issue on: HEAD commit: b51594df Merge tag 'docs-5.9-3' of git://git.lwn.net/linux git tree: upstream cons

View Article

[PATCH v1 0/6] clk: rockchip: Support module build

Export some APIs for module drivers. Fix the clock config to support module build. Fix the clk driver init, add module author, description and license

View Article

[PATCH] f2fs: allocate proper size memory for zstd decompress

As 5kft <5kft@5kft.org> reported: kworker/u9:3: page allocation failure: order:9, mode:0x40c40(GFP_NOFS|__GFP_COMP), nodemask=(null),cpuset=/,mems_a

View Article


BUG: KASAN: use-after-free in prepare_ftrace_return+0x88/0x140

While running LTP tracing on arm64 juno with kasan config enabled this kernel BUG triggered. metadata: git branch: linux-4.14.y git repo: https:/

View Article

[PATCH 1/2] ata: ahci: ceva: Update the driver to support xilinx GT phy

SATA controller used in Xilinx ZynqMP platform uses xilinx GT phy which has 4 GT lanes and can used by 4 peripherals at a time. SATA controller uses 1

View Article

[PATCH 2/2] dt-bindings: ata: achi: ceva: Update documentation for CEVA...

This patch updates the documentation for the CEVA controller for adding the required properties for 'phys' and 'resets'. Signed-off-by: Piyush Mehta

View Article


[PATCH 0/2] ata: ahci: ceva: Update the driver to support xilinx GT phy

This patch series updates the ceva driver to add support for Xilinx GT phy. This also updates the documentation with the device tree binding required

View Article


[PATCH] rpmsg: Avoid double-free in mtk_rpmsg_register_device

If rpmsg_register_device fails, it will call mtk_rpmsg_release_device which already frees mdev. Fixes: 7017996951fde84 ("rpmsg: add rpmsg support for

View Article

[PATCH v2 3/3] media: imx258: Get clock from device properties and enable it...

The IMX258 sensor driver checked in device properties for a clock-frequency property which actually does not mean that the clock is really running suc

View Article

[PATCH v2 2/3] media: imx258: Add support for binding via device tree

The IMX258 can be used also on embedded designs using device tree so allow the sensor to bind to a device tree node. Signed-off-by: Krzysztof Kozlows

View Article

[PATCH v2 1/3] dt-bindings: media: imx258: Add bindings for IMX258 sensor

Add bindings for the IMX258 camera sensor. The bindings, just like the driver, are quite limited, e.g. do not support regulator supplies. Signed-off

View Article


[PATCH 4/4] cpufreq: Move traces and update to policy->cur to cpufreq core

The cpufreq core handles the updates to policy->cur and recording of cpufreq trace events for all the governors except schedutil's fast switch case.

View Article

[PATCH 3/4] cpufreq: stats: Enable stats for fast-switch as well

Now that all the blockers are gone for enabling stats in fast-switching case, enable it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- d

View Article


[PATCH 0/4] cpufreq: Record stats with fast-switching

Hi, We disabled recording cpufreq stats when fast switching was introduced to the cpufreq core as the cpufreq stats required to take a spinlock and t

View Article

general protection fault in xsk_diag_dump (2)

Hello, syzbot found the following issue on: HEAD commit: dc1a9bf2 octeontx2-pf: Add UDP segmentation offload support git tree: net-next con

View Article


general protection fault in xsk_is_setup_for_bpf_map

Hello, syzbot found the following issue on: HEAD commit: dc1a9bf2 octeontx2-pf: Add UDP segmentation offload support git tree: net-next con

View Article

[PATCH 2/4] cpufreq: stats: Remove locking

The locking isn't required anymore as stats can get updated only from one place at a time. Remove it. Signed-off-by: Viresh Kumar <viresh.kumar@linar

View Article

[PATCH 1/4] cpufreq: stats: Defer stats update to...

In order to prepare for lock-less stats update, add support to defer any updates to it until cpufreq_stats_record_transition() is called. Signed-off-

View Article

[PATCH 4.4 00/61] 4.4.235-rc2 review

This is the start of the stable review cycle for the 4.4.235 release. There are 61 patches in this series, all will be posted as a response to this on

View Article


Re: [PATCH] arm64: Remove exporting cpu_logical_map symbol

On Tue, 1 Sep 2020 10:52:29 +0100, Sudeep Holla wrote: > Commit eaecca9e7710 ("arm64: Fix __cpu_logical_map undefined issue") > exported cpu_logical_m

View Article


[PATCH] exfat: eliminate dead code in exfat_find()

The exfat_find_dir_entry() called by exfat_find() doesn't return -EEXIST. Therefore, the root-dir information setting is never executed. Signed-off-b

View Article

[PATCH 5.8 000/253] 5.8.6-rc2 review

This is the start of the stable review cycle for the 5.8.6 release. There are 253 patches in this series, all will be posted as a response to this one

View Article

[PATCH 5.4 000/213] 5.4.62-rc2 review

This is the start of the stable review cycle for the 5.4.62 release. There are 213 patches in this series, all will be posted as a response to this on

View Article


[RESEND PATCH v2 3/6] dt-bindings: usb: Add DT bindings for STUSB160x Type-C...

Add binding documentation for the STMicroelectronics STUSB160x Type-C port controller. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- No

View Article

[RESEND PATCH v2 0/6] Add STUSB160x Type-C port controller support

This series adds support for STMicroelectronics STUSB160x Type-C port controllers [1]. STUSB160x driver requires to get power operation mode via devic

View Article

[RESEND PATCH v2 1/6] dt-bindings: connector: add power-opmode optional...

Power operation mode may depends on hardware design, so, add the optional property power-opmode for usb-c connector to select the power operation mode

View Article

[RESEND PATCH v2 2/6] usb: typec: add typec_find_pwr_opmode

This patch adds a function that converts power operation mode string into power operation mode value. It is useful to configure power operation mode

View Article



[RESEND PATCH v2 4/6] usb: typec: add support for STUSB160x Type-C controller...

STMicroelectronics USB Type-C port controllers use I2C interface to configure, control and read the operation status of the device. All ST USB Type-C

View Article

[RESEND PATCH v2 5/6] ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on...

This patch adds support for STUSB1600 USB Type-C port controller, used on I2C4 on stm32mp15xx-dkx. The default configuration on this board, on Type-C

View Article

[RESEND PATCH v2 6/6] ARM: multi_v7_defconfig: enable STUSB160X Type-C port...

Enable support for the STMicroelectronics STUSB160X USB Type-C port controller driver by turning on CONFIG_TYPEC and CONFIG_TYPEC_STUSB160X as modules

View Article

linux-next: Tree for Sep 2

Hi all, Changes since 20200828: The drm tree inherited the drm-misc tree's build failure. The rcu tree gained a conflict against the jc_docs tree.

View Article


[PATCH rdma-next 0/8] Cleanup and fix the CMA state machine

From: Leon Romanovsky <leonro@nvidia.com> From Jason: The RDMA CMA continues to attract syzkaller bugs due to its somewhat loose operation of its FS

View Article

[PATCH rdma-next 0/2] Convert RWQ and MW to general allocation scheme

From: Leon Romanovsky <leonro@nvidia.com> Continue with allocation patches. Leon Romanovsky (2): RDMA: Clean MW allocation and free flows RDMA:

View Article

[btrfs] 07f94dcaa6: xfstests.generic.062.fail

Greeting, FYI, we noticed the following commit (built with gcc-9): commit: 07f94dcaa6065f95777fcc9717043b5c677cef71 ("[PATCH 1/1] btrfs: Track subdi

View Article


[PATCH rdma-next 1/4] gcov: Open-code kmemdup() to work correctly with kernel...

From: Leon Romanovsky <leonro@nvidia.com> The kernel with KASAN and GCOV enabled generates the following splat due to the situation that gcov_info ca

View Article


[PATCH RESEND] remoteproc: scp: add COMPILE_TEST dependency

This will improve this driver's build coverage. Reported-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Alexandre Courbot <acourbot@chro

View Article

[RESEND PATCH v5 2/3] usb: dwc2: override PHY input signals with usb role...

This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals. iddig signal (ID) can

View Article

[RESEND PATCH v5 3/3] usb: dwc2: don't use ID/Vbus detection if...

If usb-role-switch is present in the device tree, it means that ID and Vbus signals are not connected to the OTG controller but to an external compone

View Article

[RESEND PATCH v5 0/3] Add USB role switch support to DWC2

When using usb-c connector (but it can also be the case with a micro-b connector), iddig, avalid, bvalid, vbusvalid input signals may not be connected

View Article


[RESEND PATCH v5 1/3] dt-bindings: usb: dwc2: add optional usb-role-switch...

This patch documents the usb-role-switch property in dwc2 bindings, now that usb-role-switch support is available in dwc2 driver. Reviewed-by: Martin

View Article

[PATCH -rc 0/4] Protect from GCC garbage input in GCOV

From: Leon Romanovsky <leonro@nvidia.com> Hi Linus, Both Colin in Ubuntu [1] and I in FC 32 are having same kernel crashes while GCOV is enabled. Th

View Article


[PATCH] dt-bindings: arm: Add devicetree binding for...

Currently, there is an assumption that the performance domains as provided by the SCMI protocol should be mirroring the exact implementation in hardwa

View Article

[PATCH rdma-next 3/4] gcov: Protect from uninitialized number of functions...

From: Leon Romanovsky <leonro@nvidia.com> The kernel compiled with GCC 10.2.1 and KASAN together with GCOV enabled produces the following splat while

View Article


[PATCH rdma-next 2/4] gcov: Use proper duplication routine for const pointer

From: Leon Romanovsky <leonro@nvidia.com> The filename is a const pointer, so use the proper string duplication routine that takes into account const

View Article

[PATCH rdma-next 4/4] gcov: Don't print out-of-memory print for all...

From: Leon Romanovsky <leonro@nvidia.com> Once GCOV fails to duplicate information, the following error is printed: gcov: could not save data for '/

View Article

[PATCH] mm: check for memory's node later during boot

register_mem_sect_under_nodem() is checking the memory block's node id only if the system state is "SYSTEM_BOOTING". On PowerPC, the memory blocks are

View Article

[dyndbg] 70f06a871f: kernel_BUG_at_lib/dynamic_debug.c

Greeting, FYI, we noticed the following commit (built with gcc-9): commit: 70f06a871f5d40ca8f977eb412358ab03b6804da ("[PATCH v3 3/3] dyndbg: fix pro

View Article


Compensation for your effort

Dear Friend, How are you I hope you are very fine with your entire family? If so glory be to Almighty God. I'm happy to inform you about my success

View Article





Latest Images