[PATCH v3 5/8] dmaengine: rcar-dmac: group slave configuration
Group slave address and transfer size in own structs for source and destination. This is in preparation for hooking up the dma-mapping API to the slav
View Article[PATCH v3 6/8] dmaengine: rcar-dmac: add iommu support for slave transfers
Enable slave transfers to devices behind IPMMU:s by mapping the slave addresses using the dma-mapping API. Signed-off-by: Niklas Söderlund <niklas.s
View Article[PATCH v3 7/8] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> --- arch/arm/boot/dts/r8a7790.dtsi | 30 ++++++++++++++++++++++++++++++ 1 fi
View Article[PATCH v3 8/8] ARM: dts: r8a7791: add iommus to dmac0 and dmac1
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> --- arch/arm/boot/dts/r8a7791.dtsi | 30 ++++++++++++++++++++++++++++++ 1 fi
View Article[PATCH] wlcore: Fix regression in wlcore_set_partition()
The below commit introduced a regression causing the wlcore to time out and go into recovery. commit 3719c17e1816695f415dd3b4ddcb679f7dc617c8 ("wlcor
View Articlelinux-next: build failure after merge of the drm-misc tree
Hi all, After merging the drm-misc tree, today's linux-next build (arm multi_v7_defconfig) failed like this: In file included from drivers/gpu/drm/n
View Article[PATCH v4 00/10] Input: synaptics-rmi4: Synaptics RMI4 Driver
This is the v4 patch series which fixes the issues identified in the previous patch series. These include: - Use devm_request_threaded_irq since I ha
View Article[PATCH v4 01/10] Input: synaptics-rmi4: Add support for Synaptics RMI4 devices
Synaptics uses the Register Mapped Interface (RMI) protocol as a communications interface for their devices. This driver adds the core functionality n
View Article[PATCH v4 02/10] Input: synaptics-rmi4: Add I2C transport driver
Add the transport driver for devices using RMI4 over I2C. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <chei
View Article[PATCH v4 03/10] Input: synaptics-rmi4: Add device tree support for RMI4 I2C...
Add devicetree binding for I2C devices and add bindings for optional parameters in the function drivers. Parameters for function drivers are defined i
View Article[PATCH v4 04/10] Input: synaptics-rmi4: Add support for 2D sensors and F11
RMI4 currently defines two functions for reporting data for 2D sensors (F11 and F12). This patch adds the common functionality which is shared by devi
View Article[PATCH v4 05/10] Input: synaptics-rmi4: Add device tree support for 2d...
2D sensors have several parameter which can be set in the platform data. This patch adds support for getting those values from devicetree. Signed-off
View Article[PATCH v4 06/10] Input: synaptics-rmi4: Add support for F12
Function 12 implements 2D touch position sensor for newer Synaptics touch devices. It replaces F11 and no device will contain both functions. Signed-
View Article[PATCH v4 07/10] Input: synaptics-rmi4: Add support for F30
RMI4 F30 supports input from clickpad buttons and controls LEDs located on the touchpad PCB. This patch adds support of the clickpad buttons and defer
View Article[PATCH v4 08/10] Input: synaptics-rmi4: Add SPI transport driver
Add the transport driver for devices using RMI4 over SPI. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> --- drivers/input/rmi4/Kconfig |
View Article[PATCH v4 09/10] Input: synaptics-rmi4: Add device tree support to the SPI...
Add devicetree binding for SPI devices. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> --- .../devicetree/bindings/input/rmi4/rmi_spi.txt
View Article[PATCH v4 10/10] HID: rmi: Make hid-rmi a transport driver for synaptics-rmi4
The Synaptics RMI4 driver provides support for RMI4 devices. Instead of duplicating the RMI4 processing code, make hid-rmi a transport driver and regi
View Article[PATCH] pci: xgene: Add ECAM fixups
X-Gene PCIe controller does not fully support ECAM. This patch adds required ECAM fixup to allow X-Gene PCIe controller to be functional in ACPI boot
View Article[PATCH] PCI/MSI: pci-xgene-msi: Enable MSI support in ACPI boot for X-Gene v1
This patch makes pci-xgene-msi driver ACPI-aware and provides MSI capability for X-Gene v1 PCIe controllers in ACPI boot mode. Signed-off-by: Duc Dan
View Article[PATCH] x86/mm: Add x86 valid_phys_addr_range() for /dev/mem
x86 does not define ARCH_HAS_VALID_PHYS_ADDR_RANGE, which leads /dev/mem to use the default valid_phys_addr_range() and valid_mmap_phys_addr_range() i
View Article
More Pages to Explore .....