[PATCH v2 1/3] dt-bindings: media: imx258: Add bindings for IMX258 sensor
Add bindings for the IMX258 camera sensor. The bindings, just like the driver, are quite limited, e.g. do not support regulator supplies. Signed-off
View Article[PATCH 4/4] cpufreq: Move traces and update to policy->cur to cpufreq core
The cpufreq core handles the updates to policy->cur and recording of cpufreq trace events for all the governors except schedutil's fast switch case.
View Article[PATCH 3/4] cpufreq: stats: Enable stats for fast-switch as well
Now that all the blockers are gone for enabling stats in fast-switching case, enable it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- d
View Article[PATCH 0/4] cpufreq: Record stats with fast-switching
Hi, We disabled recording cpufreq stats when fast switching was introduced to the cpufreq core as the cpufreq stats required to take a spinlock and t
View Articlegeneral protection fault in xsk_diag_dump (2)
Hello, syzbot found the following issue on: HEAD commit: dc1a9bf2 octeontx2-pf: Add UDP segmentation offload support git tree: net-next con
View Articlegeneral protection fault in xsk_is_setup_for_bpf_map
Hello, syzbot found the following issue on: HEAD commit: dc1a9bf2 octeontx2-pf: Add UDP segmentation offload support git tree: net-next con
View Article[PATCH 2/4] cpufreq: stats: Remove locking
The locking isn't required anymore as stats can get updated only from one place at a time. Remove it. Signed-off-by: Viresh Kumar <viresh.kumar@linar
View Article[PATCH 1/4] cpufreq: stats: Defer stats update to...
In order to prepare for lock-less stats update, add support to defer any updates to it until cpufreq_stats_record_transition() is called. Signed-off-
View Article[PATCH 4.4 00/61] 4.4.235-rc2 review
This is the start of the stable review cycle for the 4.4.235 release. There are 61 patches in this series, all will be posted as a response to this on
View ArticleRe: [PATCH] arm64: Remove exporting cpu_logical_map symbol
On Tue, 1 Sep 2020 10:52:29 +0100, Sudeep Holla wrote: > Commit eaecca9e7710 ("arm64: Fix __cpu_logical_map undefined issue") > exported cpu_logical_m
View Article[PATCH] exfat: eliminate dead code in exfat_find()
The exfat_find_dir_entry() called by exfat_find() doesn't return -EEXIST. Therefore, the root-dir information setting is never executed. Signed-off-b
View Article[PATCH 5.8 000/253] 5.8.6-rc2 review
This is the start of the stable review cycle for the 5.8.6 release. There are 253 patches in this series, all will be posted as a response to this one
View Article[PATCH 5.4 000/213] 5.4.62-rc2 review
This is the start of the stable review cycle for the 5.4.62 release. There are 213 patches in this series, all will be posted as a response to this on
View Article[RESEND PATCH v2 3/6] dt-bindings: usb: Add DT bindings for STUSB160x Type-C...
Add binding documentation for the STMicroelectronics STUSB160x Type-C port controller. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- No
View Article[RESEND PATCH v2 0/6] Add STUSB160x Type-C port controller support
This series adds support for STMicroelectronics STUSB160x Type-C port controllers [1]. STUSB160x driver requires to get power operation mode via devic
View Article[RESEND PATCH v2 1/6] dt-bindings: connector: add power-opmode optional...
Power operation mode may depends on hardware design, so, add the optional property power-opmode for usb-c connector to select the power operation mode
View Article[RESEND PATCH v2 2/6] usb: typec: add typec_find_pwr_opmode
This patch adds a function that converts power operation mode string into power operation mode value. It is useful to configure power operation mode
View Article[RESEND PATCH v2 4/6] usb: typec: add support for STUSB160x Type-C controller...
STMicroelectronics USB Type-C port controllers use I2C interface to configure, control and read the operation status of the device. All ST USB Type-C
View Article[RESEND PATCH v2 5/6] ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on...
This patch adds support for STUSB1600 USB Type-C port controller, used on I2C4 on stm32mp15xx-dkx. The default configuration on this board, on Type-C
View Article[RESEND PATCH v2 6/6] ARM: multi_v7_defconfig: enable STUSB160X Type-C port...
Enable support for the STMicroelectronics STUSB160X USB Type-C port controller driver by turning on CONFIG_TYPEC and CONFIG_TYPEC_STUSB160X as modules
View Article
More Pages to Explore .....